 |
United Kingdom | | |  |
Germany | | |  |
Russia | | |  |
Bulgaria |
Standard Tanks
APPLICATION
A complete range of water storage tanks from 1.83 m to 27.60 m diameter and heights covering most capacity requirements supplied to Agriculture, Horticulture, Sports irrigation and Industrial use. Options include roofs/covers and types of lining material.
Download our water tanks brochure
GENERAL PARAMETERS
Capacity: from 64 m³ to 16600 m³
Diameter: from 4.0 m to 32.0 m
Overall height: from 5.9 m to 30.2 m
Snow load: standard 1.1 kN/m m²,
customer can specify higher snow load.
Wind load: standard 1.1 kN/m m²,
customer can specify higher wind load.
Tanks awaiting despatch
Five mixed diameter/height tank walls ready for uplift.
WATERTANK COMPONENTS. WALLS
The tank walls are supplied in demountable form and constructed from corrugated galvanised sheets curved to the stipulated diameter with holes pre-punched to accept dome headed bolts, nuts and washers.
The thickness of panels used is varied to suit the tank model.
LINING MATERIALS
A range of lining materials are available, butyl rubber, EPDM and PVC — most models have options of 0.75 mm and 1 mm thick material and include a set of medium to low density polyethelene inner and outer cappings, clips, wire strainer kit with tensioner.
ROOF
We manufacture ten degree sloping galvanised roofs having a centre spinning and permanent centre support and eaves access hatch with two off safety bars to deter unauthorised access to the tank. Alternative forms of cover for some tank diameters tanks are options of solid PVC and black permeable anti algae as well as 400 micron floating quilt covers.
CONTACTS
Brice-Baker Systems Ltd
Reg office
Rookery Road
The Lane
Wyboston
Bedfordshire
MK 44 3AX
United Kingdom
Reg no 3715771
Tel: +44 (0)1480 216618
Fax: +44 (0)1480 406471
info@bricebaker.co.uk
